Řetěz DID Super Heavy Duty - spojka sponová | Beta RR 125 2007 23701 | Wemoto CZ
  • /CHAIN_LINK/10033046.jpg
  • /CHAIN_LINK/10033046.jpg
Tento produkt pasuje na Beta RR 125 4T Trail Enduro 2007

Řetěz DID Super Heavy Duty - spojka sponová - Beta RR 125 4T Trail Enduro 2007

Kód zboží : AB6769

Není skladem Přibližný čas doručení 7 Dní

50 Kč 50 včetně DPH

Přidat do košíku
Nebyla nalezena žádná data

Seznam modelů

Značka Model Popis Rok výroby Země

DID Chain Links

FJ Press-Fit Connecting Link

A clip-type connecting link with a light press-fit construction which gives higher fatigue strength than a slip-fit link while still retaining much of the convenience. It requires more pressure to fit than a slip-fit link, but can still be fitted with a pair of pliers as opposed to special riveting tools required for a rivet link.
No spring link can attain the strength of a rivet link and the FJ spring link has approximately 65% strength of the other links in the chain. However where a rivet link is not feasible then a press-fit link may be used.

DID highly recommends that where possible, a rivet link should be used for any sealed (O-Ring or X-Ring) chains.

Press-fit side plates must be pressed on with long-handled, adjustable pliers. Do not attempt to hammer the side plate into position: this can cause stress to the connecting link and cause it to break while in use.

Nebyla nalezena žádná data

For NZ chain

Created with Sketch.
Zpět